Table Of Contents
Readme for CiscoWorks
Device Fault Manager 3.1.1 on Solaris
Description
Related Documentation
New Device Support
Hardware and Software Requirements
Downloading DFM 3.1.1
Installing DFM 3.1.1
Known DFM 3.1.1 Problems
Resolved DFM Problems
Readme for CiscoWorks
Device Fault Manager 3.1.1 on Solaris
This Readme is for CiscoWorks Device Fault Manager (DFM) 3.1.1 on Solaris. It contains the following sections:
•
Description
•Related Documentation
•New Device Support
•Hardware and Software Requirements
•Downloading DFM 3.1.1
•Installing DFM 3.1.1
•Known DFM 3.1.1 Problems
•Resolved DFM Problems
Description
DFM 3.1.1 is a collection of updated files necessary to provide support for the devices listed in New Device Support.
Caution You cannot remove DFM 3.1.1 after installing it; to return to your original configuration, you will have to uninstall and reinstall DFM. Therefore, you should save your configuration before installing DFM 3.1.1 as described in
Installing DFM 3.1.1.
DFM 3.1.1 contains only the updated files, not a complete DFM image.
Related Documentation
Information about DFM is available from Cisco.com. Go to http://www.cisco.com/en/US/products/sw/cscowork/ps2421/tsd_products_support_series_home.html.
Note You should print out and read this document before installing DFM 3.1.1.
New Device Support
Table 1 lists the devices supported in Device Fault Manager 3.1.1.
For a list of all devices supported in Device Fault Manager 3.1, see the common LMS SDT, Supported Devices Tables for LMS 3.1 on Cisco.com. To access this, go to:
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_device_support_tables_list.html
Table 1 Device Support Provided in DFM 3.1.1
Device Type
|
Devices/
Modules Supported
|
sysObjectID
|
Class
|
Cisco Carrier Routing System
|
Cisco CRS-1 4-Slot Single-Shelf System
|
1.3.6.1.4.1.9.1.822
|
Router
|
Cisco Carrier Routing System
|
Cisco CRS-1 16-Slot Single-Shelf System
|
1.3.6.1.4.1.9.1.613
|
Router
|
Cisco 800 Series Routers
|
Cisco 866 Router
|
1.3.6.1.4.1.9.1.835
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-UC-2BRI-K9)
|
1.3.6.1.4.1.9.1.902
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-UC-4F-K9)
|
1.3.6.1.4.1.9.1.903
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-SRST-2B/K9)
|
1.3.6.1.4.1.9.1.904
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-SRST-4F/K9)
|
1.3.6.1.4.1.9.1.905
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-SRST-CUE-2BK9)
|
1.3.6.1.4.1.9.1.939
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861-SRST-CUE-4FK9)
|
1.3.6.1.4.1.9.1.940
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-SRST-CUE-4FK9)
|
1.3.6.1.4.1.9.1.990
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-SRST-CUE-2BK9)
|
1.3.6.1.4.1.9.1.991
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-SRST-4FK9)
|
1.3.6.1.4.1.9.1.992
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-SRST-2BK9)
|
1.3.6.1.4.1.9.1.993
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-UC-4FXO-K9)
|
1.3.6.1.4.1.9.1.994
|
Router
|
Cisco 1800 Series Routers
|
Cisco 1861 Integrated Services Router (CISCO1861W-UC-2BK9)
|
1.3.6.1.4.1.9.1.995
|
Router
|
Cisco 800 Series Routers
|
Cisco 861,861W Integrated Services Router
|
1.3.6.1.4.1.9.1.834
|
Router
|
Cisco 800 Series Routers
|
Cisco 867 Integrated Services Router
|
1.3.6.1.4.1.9.1.836
|
Router
|
Cisco 800 Series Routers
|
Cisco 881 Integrated Services Router
|
1.3.6.1.4.1.9.1.837
|
Router
|
Cisco 800 Series Routers
|
Cisco 881 Integrated Services Router (881SRST)
|
1.3.6.1.4.1.9.1.840
|
Router
|
Cisco 800 Series Routers
|
Cisco 886 Integrated Services Router
|
1.3.6.1.4.1.9.1.842
|
Router
|
Cisco 800 Series Routers
|
Cisco 887 Integrated Services Router
|
1.3.6.1.4.1.9.1.847
|
Router
|
Cisco 800 Series Routers
|
Cisco 888 Integrated Services Router
|
1.3.6.1.4.1.9.1.852
|
Router
|
Cisco 800 Series Routers
|
Cisco 888 Integrated Services Router (888SRST)
|
1.3.6.1.4.1.9.1.856
|
Router
|
Cisco 800 Series Routers
|
Cisco 885 Integrated Services Router (885-D-3)
|
1.3.6.1.4.1.9.1.859
|
Router
|
Cisco 800 Series Routers
|
Cisco 885 Integrated Services Router (885-E/J-3)
|
1.3.6.1.4.1.9.1.861
|
Router
|
Cisco Services Modules
|
Cisco ACE 4710 Application Control Engine
|
1.3.6.1.4.1.9.1.824
|
Router
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7855I Media Convergence Server
|
1.3.6.1.4.1.9.1.588
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7865I Media Convergence Server
|
1.3.6.1.4.1.9.1.589
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7825I Media Convergence Server
|
1.3.6.1.4.1.9.1.746
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7816I Media Convergence Server (IBM)
|
1.3.6.1.4.1.9.1.898
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7828I Media Convergence Server (IBM)
|
1.3.6.1.4.1.9.1.899
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7816H Media Convergence Server (HP)
|
1.3.6.1.4.1.9.1.900
|
Host
|
Cisco 7800 Series Media Convergence Servers
|
Cisco 7828H Media Convergence Server (HP)
|
1.3.6.1.4.1.9.1.901
|
Host
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3110G for IBM BladeCenter (WS-CBS3110G-S)
|
1.3.6.1.4.1.9.1.909
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3110G for IBM BladeCenter (WS-CBS3110G-ST)
|
1.3.6.1.4.1.9.1.910
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3110X for IBM BladeCenter (WS-CBS3110X-S)
|
1.3.6.1.4.1.9.1.911
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3110X for IBM BladeCenter (WS-CBS311X-ST)
|
1.3.6.1.4.1.9.1.912
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3110X for IBM BladeCenter (CBS3110-STACK)
|
1.3.6.1.4.1.9.1.947
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3012 (WS-CBS3012-IBM)
|
1.3.6.1.4.1.9.1.999
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Switch Module 3012 for IBM BladeCenter
|
1.3.6.1.4.1.9.1.1000
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3125G for HP (WS-CBS3012-IBM-I)
|
1.3.6.1.4.1.9.1.1001
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3120G for HP (WS-CBS3120G-S)
|
1.3.6.1.4.1.9.1.918
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3125X for HP (WS-CBS3125-X)
|
1.3.6.1.4.1.9.1.1002
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3120X for HP (WS-CBS3120X-S)
|
1.3.6.1.4.1.9.1.919
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3120X for HP (CBS3120-STACK)
|
1.3.6.1.4.1.9.1.948
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3130G for Dell M1000E (WS-CBS3130G-S)
|
1.3.6.1.4.1.9.1.921
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3130X for Dell M1000E (WS-CBS3130X-S)
|
1.3.6.1.4.1.9.1.922
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3130X for Dell M1000E (CBS3130-STACK)
|
1.3.6.1.4.1.9.1.949
|
Switch
|
Cisco Catalyst Blade Switch 3000 Series
|
Cisco Catalyst Blade Switch 3032 for Dell M1000E (WS-CBS3032-DEL)
|
1.3.6.1.4.1.9.1.920
|
Switch
|
Cisco IE 3000 Series Switches
|
Cisco IE 3000-4TC Industrial Ethernet Switch
|
1.3.6.1.4.1.9.1.958
|
Switch
|
Cisco IE 3000 Series Switches
|
Cisco IE 3000-8TC Industrial Ethernet Switch
|
1.3.6.1.4.1.9.1.959
|
Switch
|
Cisco IE 3000 Series Switches
|
Cisco Rockwell 1783-MS10T Industrial Ethernet Switch
|
1.3.6.1.4.1.9.1.961
|
Switch
|
Cisco ME 4900 Series Ethernet Switches
|
Cisco ME 4924-10GE Switch
|
1.3.6.1.4.1.9.1.788
|
Switch
|
Cisco MDS 9000 Series Multilayer Switches
|
Cisco MDS 9222i Multiservice Modular Switch
|
1.3.6.1.4.1.9.12.3.1.3.651
|
Switch
|
Cisco MDS 9000 Series Multilayer Switches
|
Cisco MDS 9124e Multiservice Modular Switch
|
1.3.6.1.4.1.9.12.3.1.3.606
|
Switch
|
Rockwell Stratix 8000 Series Switches
|
Rockwell Stratix MS06T
|
1.3.6.1.4.1.9.1.960
|
Switch
|
Cisco ASA-5500 Series Adaptive Security Appliances
|
Cisco ASA-5580 Adaptive Security Appliance
|
1.3.6.1.4.1.9.1.914
|
Firewall
|
Cisco ASA-5500 Series Adaptive Security Appliances
|
Cisco ASA-5580 Adaptive Security Appliance Security Context
|
1.3.6.1.4.1.9.1.915
|
Firewall
|
Cisco ASA-5500 Series Adaptive Security Appliances
|
Cisco ASA-5580 Adaptive Security Appliance System Context
|
1.3.6.1.4.1.9.1.916
|
Firewall
|
Hardware and Software Requirements
DFM 3.1.1 can be installed on DFM 3.1. Installing DFM 3.1.1, provides instructions on how to verify the DFM version that is on your system.
For information on installing DFM, refer to the documents on Cisco.com at the URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html
Downloading DFM 3.1.1
DFM 3.1.1 files are downloaded in a compressed form. To prevent overwriting of files in existing directories as well as ensure that adequate disk space is available, you should download the files to a temporary working area of your server, and then uncompress the files.
Note You can also use the Common Services Device Update function to download DFM 3.1.1. For more information, from the Common Services home page, select Software Center > Software Update and click Help.
Step 1 Make sure you have adequate free space, then, from the DFM download page at http://www.cisco.com/pcgi-bin/tablebuild.pl/cw2000-dfm, click the link to cwdfm3_1_1_sol.zip, and follow the instructions to download the zip file to a temporary working area of your server.
Step 2 Unzip all files into the temporary working area.
Installing DFM 3.1.1
Caution You cannot remove DFM 3.1.1 after installing it; to return to your original configuration, you will have to uninstall and reinstall DFM. Therefore, you should save your configuration before installing DFM 3.1.1 as described in
Step 1.
Step 1 Make sure that you have a backup of your configuration, in case you need to revert back to it. (DFM 3.1.1 cannot be uninstalled.)
Step 2 Verify that DFM 3.1 is installed:
a. From the Common Services home page, select Software Center > Software Update.
b. In the Products Installed table, verify that the Device Fault Manager row lists Version 3.1.
Step 3 Move to the directory in which the unzipped DFM 3.1.1 files reside, run the installation script:
Note You can run the installation remotely. For information on mounting and unmounting disks, refer to Installation and Setup Guide for Device Fault Manager on Solaris.You can view this document by logging onto Cisco.com and going to http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html
Step 4 Follow the prompts in the installation script. The options displayed by the installation script depend on your configuration.
Step 5 Verify the installation:
a. From the Common Services home page, select Software Center > Software Update.
b. In the Products Installed table, click Device Fault Manager.
c. In the Patches Installed table, verify that the version corresponding to Device Fault Manager is 3.1.1.
You may have to stop and restart the CiscoWorks daemon manager. This is required if you applied DFM 3.1.1 to the following scenario:
a. You were running DFM 3.0.2 with the Device Support Patch, and then
b. You upgraded to DFM 3.1
If either of these scenarios apply to you, stop and restart the CiscoWorks daemon manager:
# /etc/init.d/dmgtd start
Note You must run these commands if these scenarios apply to you. Otherwise, some previously-supported devices may not be managed.
Step 6 Rediscover any devices that are in the Unsupported state using Device Management > Rediscover/Delete from the DFM home page.
Step 7 Remove the distribution files from the temporary working area on your server.
Known DFM 3.1.1 Problems
The following table describe the known problems in DFM 3.1.1. Unless otherwise specified, there is no workaround for these problems.
For a list of known problems in Device Fault Manager 3.1, refer to the Release Notes. You can view them on Cisco.com by going to:
http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_installation_guides_list.html
For the status of other DFM bugs that are due to device-specific problems, refer the documents on Cisco.com at this URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps2421/prod_release_notes_list.html.
Table 2 Known Problems in DFM 3.1.1
Bug ID
|
Summary
|
Explanation
|
CSCso70605
|
IDU20 and IDU21: Warning alert is not generated for Operationally Down Card.
|
When the Module Status is set to 3 for 1.3.6.1.4.1.9.5.1.3.1.1.10, Warning alert should be generated for an Operationally Down Card as per the Syntax of the MIB. It is not generated. But a Critical alarm is generated when the Module Status is set to 4.
|
CSCso70635
|
IDU20: In Normal state, a Critical alert is generated for Temperature.
|
When the value for chassisTempAlarm is set as 2 for this OID, Critical alert is generated for the following devices:
•2960-PD-8TT-L - 1.3.6.1.4.1.9.1.952
•2960-24LT-L - 1.3.6.1.4.1.9.1.951
Alerts must not be generated and the status must be Normal.
|
CSCso70617
|
IDU20: Card Operationally Down alarm is displaying two events instead of one.
|
When a card operationallydown alarm is generated for 1.3.6.1.4.1.9.9.117.1.2.1.1.2, AAD is displaying two events instead of one.
|
CSCso52084
|
Support for revised MIB values should be provided.
|
Alerts are not generated for the Environment components like temperature, power, fan, and voltage of some revised Mib values. Warning alert is not generated for Fan in IDU21. Support for revised MIB values should be provided.
|
Resolved DFM Problems
The following table describes DFM problems that are resolved in DFM 3.1.1.
Table 3 Problems Resolved in DFM 3.1.1
Bug ID
|
Summary
|
Explanation
|
CSCsq55397
|
Notification trap community cannot be customized.
|
This problem has been resolved.
|
CSCsq46143
|
In DFM Component Event Codes needs to document
|
This problem has been resolved.
|
CSCsq80950
|
Editing Notification Groups makes the Java Process run; but Notification Group Edit window is not displayed.
|
This problem has been resolved.
|
CSCsq88500
|
DFM Traps are not generated for Cleared Alerts in LMS 3.0.
|
This problem has been resolved.
|
CSCsr25953
|
DFM is unable to manage ATM interfaces.
|
This problem has been resolved.
|
